Stands and Mounts
RAM B Size 1″ Ball on 2.5″ Round Plates with AMPs hole pattern, Long Length Double Socket Arm
RAM B Size 1″ Ball on 2.5″ Round Plates with AMPs hole pattern, Long Length Double Socket Arm
RAM-B-101U-C consists of a Long length B size 1″ double socket arm and two 2.5″ diameter round plates that contain the universal AMPS hole pattern. The mount is designed with a patented rubber ball and socket system that dampens shock and vibration, and allows for almost infinite adjustment to achieve the perfect viewing angle. The AMPs hole pattern found on the round plate will connect to many RAM products.
RAM D Size 2.25″ Ball Mount with 3.68″ Round Plate & 4.75″ Square Plate VESA 75mm and 100mm Hole Patterns
-
$284.00Add to cart
RAM D Size 2.25″ Ball Mount with 3.68″ Round Plate & 4.75″ Square Plate VESA 75mm and 100mm Hole Patterns
The RAM-D-101U-246 consists of a 3.68″ diameter round base, STANDARD length double socket arm and 4.75″ square plate with the VESA hole pattern. The 4.75″ square plate has 4x100mm holes and 4x75mm holes in each corner. The 3.68″ diameter round base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25″ diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
-
$284.00Add to cart
RAM Double Suction Mount and Tab-Tite Cradle for 10″ Tablets
-
$185.00Add to cart
RAM Double Suction Mount and Tab-Tite Cradle for 10″ Tablets
RAM Double Suction Mount and Tab-Tite cradle for tablets 9-10.5″ includes a double 3.3″ twist lock suction cup base, double socket arm, round base adaptor and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces.
-
$185.00Add to cart
RAM Mount X-Grip Phone Mount with Tough-Claw
-
$120.00Add to cart
RAM Mount X-Grip Phone Mount with Tough-Claw
RAM Mount X-Grip Phone Mount with Tough-Claw consists of the small Tough-Claw™ base and universal X-Grip® cradle. The X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
-
$120.00Add to cart
RAM Mounts GDS Vehicle Dock for the Samsung Galaxy Tab Active2
-
$171.00Add to cart
RAM Mounts GDS Vehicle Dock for the Samsung Galaxy Tab Active2
The RAM Mounts vehicle dock with GDS Technology™ is a dual spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Samsung Galaxy Tab Active2 used with a RAM Mounts IntelliSkin case.
-
$171.00Add to cart
RAM Mounts GDS® Locking Vehicle Dock for Galaxy Tab A 10.1
-
$271.00Add to cart
RAM Mounts GDS® Locking Vehicle Dock for Galaxy Tab A 10.1
RAM Mounts vehicle dock with GDS Technology™ for the Samsung Galaxy Tab A 10.1 is a spring loaded, quick release cradle with a keyed lock that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Samsung Galaxy Tab A 10.1 with IntelliSkin®.
-
$271.00Add to cart
RAM Mounts IntelliSkin Case with GDS® for Galaxy Tab 4 10.1
-
$108.00Add to cart
RAM Mounts IntelliSkin Case with GDS® for Galaxy Tab 4 10.1
RAM Mounts IntelliSkin Case with GDS® for the Samsung Galaxy Galaxy Tab 4 10.1 is a protective sleeve featuring GDS Technology™ . The IntelliSkin’s integrated GDS® connector is moulded directly into the skin, preventing damage to your device’s charging port from repetitious docking. Eighteen moulded ruggedised docking contacts on the exterior of the skin are also designed for repetitive docking in field applications. The IntelliSkin is compatible with a variety of GDS vehicle and desktop docking stations, allowing for charging and data syncing.
-
$108.00Add to cart
RAM Mounts IntelliSkin Case with GDS® for Galaxy Tab A 10.1
-
$104.00Add to cart
RAM Mounts IntelliSkin Case with GDS® for Galaxy Tab A 10.1
RAM Mounts IntelliSkin Case with GDS® for the Samsung Galaxy Galaxy Tab A 10.1 2019 is a protective sleeve featuring GDS Technology™ . The IntelliSkin’s integrated GDS® connector is moulded directly into the skin, preventing damage to your device’s charging port from repetitious docking. Eighteen moulded ruggedised docking contacts on the exterior of the skin are also designed for repetitive docking in field applications. The IntelliSkin is compatible with a variety of GDS vehicle and desktop docking stations, allowing for charging and data syncing.
-
$104.00Add to cart
RAM Mounts IntelliSkin Case with GDS® for the Samsung Galaxy Tab Active 2
RAM Mounts IntelliSkin Case with GDS® for the Samsung Galaxy Tab Active 2
RAM Mounts IntelliSkin Case with GDS® for the Samsung Galaxy Tab Active 2 is a protective sleeve featuring GDS Technology™ . The IntelliSkin’s integrated GDS® connector is moulded directly into the skin, preventing damage to your device’s charging port from repetitious docking.
RAM Mounts Locking Powered Cradle for Galaxy Tab Active 2
-
$236.00Add to cart
RAM Mounts Locking Powered Cradle for Galaxy Tab Active 2
RAM® Mounts has partnered with Samsung to develop a powered vehicle cradle for the Samsung Galaxy Tab Active 2. The cradle has been designed to meet the demands of field workers in a variety of applications including transportation, field sales, logistics, manufacturing and much more. This low-cost cradle provides power to the device through the pogo pin interface on the tablet and can be easily rotated for both portrait and landscape operation of the device. For security and theft deterrence, the RAM-HOL-SAM7PKLU features a keyed lock. Unique features include access to the NFC reader while in the cradle for scanning NFC tags as well as the stylus.
-
$236.00Add to cart
RAM Suction Mount with Flex Arm for Phone
RAM Suction Mount with Flex Arm for Phone
RAM Suction Mount with Flex Arm for Phone puts your mobile phone in the right position in a car, on a desktop, wheelchair table and other surfaces. The mount consists of a 3.3″ suction cup locking base, 6″ flex arm and diamond base end. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces.
RAM Suction Mount with X-Grip for Phone
-
$139.00Add to cart
RAM Suction Mount with X-Grip for Phone
RAM Suction Mount with X-Grip for Phone holds your phone just where you need it. Ideal for vehicle windshields, consists of a 3.3″ diameter RAM® Twist-Lock™ suction cup base, medium length double socket arm, and the popular spring-loaded RAM® X-Grip® large phone holder. The RAM® X-Grip® features an ‘X’ design that expands and contracts to provide a perfect fit for your device – even if it’s in a case. Made of powder-coated, marine-grade aluminium, stainless steel components, and high-strength composite, this large version of the RAM® X-Grip® fits phones ranging from 1.75″ to 4.5″ in width and keeps your device completely functional and accessible. RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.
-
$139.00Add to cart
Showing 1–12 of 20 results